EcoFlow RIVER Extra Battery 288Wh Backup Power for RIVER Certified Refurbished

Description

How to install RIVER Extra Battery?
1.Please make sure that the RIVER is off. Then take out the screwdriver from the extra battery module kit, and locate the four screws on the bottom cover.
Note: Please pay attention, and avoid the static electricity during the installation process.
How to install RIVER Extra Battery?
2. Please remove the 4 screws on the bottom cover. The extra battery module should be positioned as shown in the figure.
3. Align the male and female battery sockets, and connect them. Close the bottom cover. Take the four long screws from the kit and screw them on the screw mouth.
How to install RIVER Extra Battery?
4. Put the RIVER upright and turn it on. The extra battery’s ambient light will turn on. On the RIVER’s display, if the extra battery module indicator light is on, then it is activated successfully. If the ambient light or the extra battery module indicator light is not on, repeat the installation steps, and then check the connection.
What’s in the box
1* RIVER Extra Battery
4* Long Screws
1* Cross Screw Driver
1*User Guide
RIVER + Extra Battery:
Compact and reliable for outdoor adventures or RV/van usage.
Compact and portable
With the rugged easy-to-carry handle, the 17lbs RIVER Bundle is perfect for outdoorsy use. Less than half the size of a microwave, it can easily fit in the trunk of a minivan or anywhere in the house whenever you need an AC power source. You can always stay prepared for the next adventures.
Sustainable solar charging
The smart MPPT inside of the RIVER Bundle enables it to recharge quickly through the solar power at a 200W maximum loading scale. With two 110W solar panels (IP67 waterproof) connected in parallel under a direct, perfect sunlight condition, the RIVER Bundle can be fully charged from 3 to 6 hours, giving you the experience to enjoy the clean, sustainable power from nature.
<